Seadek Marine Products

Surf Expo 2012, Bote paddle board pads

2012-01-16T08:59:00.000-08:00

We've been manufacturing these pads for Bote now for quite some time. They were a big hit at this year's Surf Expo in Orlando, FL. Stand Up Paddle fishing looks to be the next big thing in an already booming SUP market.

Seadek & Castaway Customs in Nica with Surfari Charters

2012-01-16T06:17:00.000-08:00

Here is a video of Seadek and Castaway Customs trip down with Surfari Charters to do a custom install of Seadek on the Va Pué. We had a great time crushing Tunas and catching waves!

Hydrotunes

2012-01-12T11:30:00.000-08:00

Be sure to check out our friends at the Hydrotunes booth at the Austin Boat Show. Here is a POP on its way off to them today.

http://hydrotunes.com/

http://www.austinboatshow.com/

New Offices Going In At The SeaDek Factory

2012-01-12T08:32:00.000-08:00

Last year was busy and this year looks to be even busier. Need room for all that work to get done!

SeaDek On Your Treestand? Sure!

2012-01-11T13:33:00.000-08:00

We've been getting a lot of requests lately from hunters for camo sheet material to be used in tree stands/blinds. Here's one we did for our friends over at Salt ater Sprotsman a while back. Still holding up well I hear.

Applying a SeaDek Swim Platform Pad

2012-01-11T13:00:00.000-08:00

Watch as Jason Gardner quickly and easily applies a SeaDek swim platform pad to a swim platform.

TOOLS:

The only items you'll need for your installation should be a sharp razor blade, masking tape, window cleaner and a clean cloth.

- Thoroughly clean the area where SeaDek will be applied. We recommend using a cleaner that will not leave any residue. A glass cleaner used with a clean cloth or scotch-bright pad works well. Make sure the area is completely dry before applying the pad.

- If there is any glue, grease, adhesive or other substances on the area that the pads are to be applied, mineral spirits followed by acetone may be used to remove them. Be sure to use a glass cleaner afterwards as suggested above. Again the platform surface must be completely dry before applying the pad.

- If pads are being applied to a new boat right from the factory it is very important that all mold release is thoroughly removed from the boat surface. Be sure to check with the boat manufacturer before applying pads.

- Arrange the pad to the exact location to be covered and verify proper fit and placement. Once you are sure the pad is the right size and are happy with the location turn the pad over so that the paper backing is facing up. With a sharp razor, carefully cut the paper backing right down the center being careful not to cut into the pad. From the center, peel up each side a little to make sure the backing is completely cut all the way through.

- Turn the pad back over and reposition the pad exactly where you want it to be installed. Firmly secure one side of the pad to the platform using two-inch masking tape.

- Now lift up the untapped side of the pad with one hand and loosen the paper backing with the other. This process is a little easier if you have someone to help you out. Slowly and carefully pull up the rest of the backing while applying the pad to the platform. Use your hand to apply pressure to the pad to assure a firm bond between the pad and the platform.

- Remove the tape from the other side of the pad and repeat the application process just like you did on the first side.

- Take time to press the entire pad into place with your hands especially around the edges of the pad. You can watch a video demonstration of this installation on our website:

www.seadek.com under the DIY section.

Swim Platform provided by our friends over at Contemporary Fiberglass.

http://myswimplatform.com/

10907 E. Marietta Ave., Suite 2, Spokane Valley, WA, 99206-6620
Email: parrotheadinwa4@comcast.net

Music from: http://www.royaltyfreemusicclips.com/http://www.royaltyfreemusicclips.com/

SeaDek On A Chaparral 285 SSI

2012-01-09T11:03:00.000-08:00

Just happened across this good looking Chaparral with a custom SeaDek pad on the Chaparral forum. Looks like mica over black.

http://forum.chaparralboats.com/index.php?showtopic=15308&hl=seadek&st=40

SeaDek Option On The New Sea Ray 210 SLX

2012-01-05T07:54:00.000-08:00

A Cut Above: The New Sea Ray® 210 SLX®

Knoxville, Tenn. – Jan. 4, 2012 – Not all bowriders are created equal. Case in point: Sea Ray’s luxurious SLX series. These five boats ranging in length from 21 to 30 feet include deluxe features such as premium soft-touch dashboards with double-top stitching, treatments in wood, SmartCraft® diagnostic instrumentation, and chrome switches and levers. And that’s just their helms! Thrilling performance comes from powerful MerCruiser® engines and precision deep-V hulls. Simply put, these exceptional sport boats are made to enhance the owner’s image as well as their confidence and enjoyment on the water.

Replacing the previous 210 SLX, Sea Ray’s new 210 SLX model fits right into the fleet. It comes with impressive standard appointments, a meticulously crafted interior and sleek external styling — creating a dynamic mix of form and function. Take, for example, the deep, roomy bow area with plush cushions that are hinged to allow for noticeable convenience when accessing or stowing gear. The floor here and in the cockpit is finished fiberglass for enhanced structural integrity and longevity, and snap-in carpeting comes standard. Watersports enthusiasts will love the lockable wakeboard locker with vinyl matting and a gas-assisted lid, as well as the optional forward-facing, folding tower with integrated bimini top and anchor light.

Because no two owners use their boat in the same way, the 210 SLX offers a choice of two distinct cockpit configurations, each with attractive, comfort-conscious accoutrements. Standard is a motorbox flanked by jump seats and backed by a sun pad. A popular option is a large sun pad lounger with starboard side walk-thru. Owners also get a choice of interior color schemes — chocolate/taupe (standard) or taupe/white (optional) — which incorporate elegant two-tone vinyl and color-matched accents throughout. Either interior layout is ideal for basking in the warm sun or chilling out at water’s edge using the integrated/extended swim platform with stainless-steel swim ladder and optional SeaDek® padding.

Perfect for that action-packed weekend, the 210 SLX comes with a standard 220-hp MerCruiser 4.3L MPI engine and Alpha® I sterndrive, or owners can upgrade to 300 horses and a Bravo® III drive for boosted performance. Custom, backlit SmartCraft instruments with glass lenses continuously monitor the ride and provide diagnostic information to the driver. Entertaining is a breeze thanks to a Sony® stereo with CD player, four Rockford Fosgate® weatherproof speakers and iPod® connector, all controlled by a digital display cockpit remote. The helm itself has a handsome trim package in wood and metal that imparts driver-focused luxury.

Sea Ray has added a number of exterior enhancements across its Sport Boats lineup for 2012, and the 210 SLX reaps the benefits. Along with the aforementioned optional black watersports tower, the 210 SLX boasts a custom three-piece, curved glass windshield with black anodized frame for great visibility and good looks. Customizing options also include two-tone gel coat, special graphics and full-colored hull bottoms in a variety of colors. A trailer with surge disk brakes and a swing-away tongue is standard, but owners can opt for a Boatmate® Platinum Premium Trailer with two-tone paint scheme matching the boat’s hull color, radial tires, Sea Ray LED backlit logo and more.

When customers invest in a Sea Ray, they not only get one of the world’s finest pleasure boats, they also become part of the Sea Ray family with complimentary membership in the Sea Ray Owners Club™ and its world of exclusive benefits and opportunities. Only Sea Ray can bring it all together. The best boats — like the new 210 SLX — the best programs and the best boating experience. After all, our customers’ taste for the exceptional doesn’t stop at the shoreline.
ABOUT SEA RAY
Founded in 1959, Sea Ray is the world’s largest manufacturer of superior quality pleasure boats. Sea Ray is headquartered in Knoxville, Tenn., and operates as part of the Boat Group division of Brunswick Corporation. With more than 40 models ranging from 17 to 60 feet, Sea Ray makes a boat for every lifestyle — each built with a unique commitment to quality, craftsmanship and excellence throughout. Additional information about Sea Ray is available at www.searay.com.

ABOUT BRUNSWICK
Headquartered in Lake Forest, Ill., Brunswick Corporation endeavors to instill "Genuine Ingenuity"(TM) in all its leading consumer brands, including Mercury and Mariner outboard engines; Mercury MerCruiser sterndrives and inboard engines; MotorGuide trolling motors; Attwood marine parts and accessories; Land 'N' Sea, Kellogg Marine, and Diversified Marine parts and accessories distributors; Arvor, Bayliner, Boston Whaler, Cabo Yachts, Crestliner, Cypress Cay, Harris FloteBote, Hatteras, Lowe, Lund, Meridian, Princecraft, Quicksilver, Rayglass, Sea Ray, Suncruiser, Triton Aluminum, Trophy, Uttern and Valiant boats; Life Fitness and Hammer Strength fitness equipment; Brunswick bowling centers, equipment and consumer products; Brunswick billiards tables and foosball tables. For more information, visit www.brunswick.com.

For additional information, contact:
Rob Noyes
Sea Ray Boats
2600 Sea Ray Blvd.
Knoxville, TN 37914
Phone (865) 522-4181 / Fax (865) 971-6444

First Boating Magazine Ad Of 2012

2012-01-04T13:07:00.000-08:00

Looking forward to a great 2012. Just getting our first ads of the season together.

http://www.boatingmag.com/

One of our employees put his SeaDek fish ruler to good use this holiday break!

2012-01-03T14:54:00.000-08:00

Manitou Pontoon Boats

2012-01-03T14:37:00.000-08:00

New year, new boats. SeaDek is now providing faux teak pads for Manitou Pontoon Boats. Pontoon boats have come a long way in the past few years and have become one of the fastest growing market segments in the marine industry. http://www.manitouboats.com/

Rear swim platform SeaDek pads on a Manitou X-Plode make getting into and out of the water a safe and comfortable experience.

SeaDek Faux Teak - 2002 Regal 2860

2011-12-08T09:17:00.000-08:00

Some nice post-install photos from a customer. Featured here are brown over black faux teak pads on a 2002 Regal 2860.

More Regal pads available here: http://www.seadekstore.com/RegalSwimPlatformPads.aspx

Protector 33 - Military & Recreational Boats

2011-12-02T06:52:00.000-08:00

These guys make some bad-ass boats. Glad to be working with them.

http://www.protectorboats.com/

Crownline Platform From Contemporary Fiberglass

2011-12-02T06:40:00.000-08:00

Another beautiful Swim Platform from our friends over at Contemporary Fiberglass.

http://myswimplatform.com/

10907 E. Marietta Ave., Suite 2, Spokane Valley, WA, 99206-6620
Email: parrotheadinwa4@comcast.net

WakeWorld.com Toys For Tots Fundraiser

2011-12-02T06:26:00.000-08:00

SeaDek is proud to once again be a part of WakeWorld.com's Toys For Tots Fundraiser. Great job Dave!

View more news videos at: http://www.nbcsandiego.com/video.

2012 Reflex 20 Flats Boat

2011-11-30T06:46:00.000-08:00

Here's a few shots of one of our CAD designers, Dave, digitizing a new Reflex 20 flots boat from Reflex Boat Works out of Leesburg, FL. Once the pads and install are finished I'll post some follow up shots.

Engel Coolers Now Featuring SeaDek Top

2011-11-28T11:14:00.000-08:00

SeaDek is proud to be working with Engel Coolers. While not yet available on every model, selection is expanding. Ask for SeaDek on your next Engel Cooler!

http://www.engel-usa.com

Peel & Stick SeaDek Fish Ruler?

2011-11-18T12:32:00.000-08:00

Trying to gauge interest in this as a retail product. If you think this is a product you would consider purchasing please shoot us an email and let us know.

This prototype pad is 8 inches wide by 38 inches long. Storm gray over black. Thermo formed eva for exceptional non skid. Peel and stick application. Confortable to sit or stand on. Would retail in the $40 range.

Please send comments to info@seadek.com

Custom examples:

Wake World Pad For A Tige Z3

2011-11-18T11:49:00.000-08:00

We've done pads for David over at Wake World in the past but this one is pretty sick.

http://www.wakeworld.com/

Monterey 264 FSX With SeaDek Faux Teak

2011-11-18T07:40:00.000-08:00

Visiting the Monterey Factory yesterday and took a few shots of a brown over black faux teak, swim platform and cockpit kit on a 264 FSX. This boat was shipping out to a customer. I have a feeling they're going to be pretty thankful next week.

Monterey Boats: http://www.montereyboats.com/

Custom SeaDek Cobalt Swim Step Pad

2011-11-16T09:17:00.000-08:00

Just saw this pad on its way out of the factory today and thought I'd post it. You can see and purchase other Cobalt pads here on our online store: http://www.seadekstore.com/cobalt.aspx

2011 Marine Dealer Conference & Expo - SeaDek

2011-11-14T08:40:00.000-08:00

Great MDCE event this year and we at SeaDek were proud to be a part. We were able to meet and speak to the leading marine dealers in the country as well as many leading boat builders from around the world. Below are a few image from before and during the event.

http://www.boatingindustry.com/mdce/

http://www.montereyboats.com/

http://www.crownline.com/2011/

http://www.searay.com/

http://www.supraboats.com/

Our smiling SeaDek employees. Well, I'm sure Donnie is smiling on the inside...

http://www.seadek.com/

http://www.gaylordhotels.com/

Manatou is one of the first pontoon boat manufacturers to integrate SeaDek into their designs.

http://www.manitouboats.com/

http://www.tige.com/

RIB - Before & After SeaDek

2011-11-03T13:43:00.000-07:00

Teak over holly SeaDek eva material.

SeaRay 380 Faux Teak Swim Platform Pad

2011-10-27T13:24:00.000-07:00

View more SeaRay pads: http://www.seadekstore.com/searay.aspx

Gambler - DIY - Before and After

2011-10-27T09:29:00.000-07:00

SeaDek nonskid sheet material is easy to cut and install, perfect for do it yourself decking projects.

This install done by: http://www.gambler-bang.com/

Moomba Roo - SeaDek Swim Platform Pad

2011-10-27T09:15:00.000-07:00

On its way to its new home.

Order yours today: http://www.seadekstore.com/moomba.aspx

IBEX 2011 - Thank You From SeaDek

2011-10-25T08:28:00.000-07:00

Thank you for visiting us at the SeaDek booth at IBEX 2011

We really appreciate you stopping by the booth last week and taking the time to learn about our products. I hope we were able to answer all of your question and if you requested a follow up from us then you'll be hearing from someone very soon. If you have further questions or would like to place an order, please send us an email at: info@seadek.com or give us a call at: 321.632.4466

You can also visit our website: www.seadek.com

We look forward to doing business with you.

Look For SeaDek At MDCE Booth #832

2011 Marine Dealer Conference & Expo

What it is: MDCE is where marine dealers gather to learn from the industry's leading experts and explore the latest trends with marine manufacturers and service providers. Three different educational tracks will be offered, focusing on sales, marketing, service and management topics. The event takes place in an Orlando resort setting, offering many chances for networking and relaxation.

What will be covered: Expert tips, strategies and best practices for marine dealers. There will be special tracks devoted to sales, marketing, service and management.

Who should attend: Marine dealers seeking strategies to improve their profits and performance. The Powering Profits Track is designed for strategic decision makers such as general managers, department managers and dealer principals. The Service Track is designed for rising technicians, service advisors, service and parts managers. The Sales and Marketing Track has sessions for sales personnel, sales managers, general managers, marketing managers (including online managers) and dealer principals.

Registration includes:

Unlimited access to the session-packed conference

Unlimited access to the Expo Hall, with more than 100,000 square feet of exhibitor space

2 days of Marine Industry Certified education credits

Continental breakfasts, lunches and cocktail receptions on Tuesday & Wednesday

Rates:

Full conference pass: $449

Additional attendees from the same dealership: $429

**MRAA members save $50 off all registrations**

Social Registration for Spouses/Family Members: $199
(Includes cocktail receptions, but not education sessions)

2011 Marine Dealer Conference & Expo
November 6-9, 2011
Gaylord Palms Resort and Convention Center
Orlando, Florida

IBEX 2011 - SeaDek Booth 2639

2011-10-11T12:01:00.000-07:00

Looking forward to IBEX (International BoatBuilder's Exhibition & Conference) next week in Louisville. You can find us at booth number 2639 in the composites area. Stop in and see what's new, grab some samples and learn how SeaDek can enhance your boats.

www.seadek.com

Installing a new set of SeaDek swim platform pads

2011-10-06T17:38:00.000-07:00

This is the third in a series of three videos demonstrating how to remove an old pad, clean the platform and then install a new SeaDek pad. This particular video explains how to properly install a new set of SeaDek swim platform pads.

SeaDek In Marine Business Journal

2011-10-04T16:35:00.000-07:00

SeaDek is featured in the recent Marine Business Journal article:

IBEX – One Year Later
All it took was a change in venue

BY NANCY BIRNBAUM

Last year, IBEX wasn't anchored at its usual Florida locale. Instead, the annual boatbuilders' trade event cruised up the east coast in search of a more economically accessible port of call on the Ohio River. For 2011, the International BoatBuilders' Exhibition (IBEX) will return to the Kentucky Exposition Center, in Louisville, Kentucky.

Back in 2010, recession-weary boatwrights were presented with 71 new exhibitors in addition to the 459 who returned from the previous year's show. Co-hosts Professional BoatBuilder Magazine and the National Marine Manufacturers Association (NMMA) assembled a Louisville conference lineup that included 20 free exhibitor workshops, more than 60 seminar sessions in 12 tracks, and a number of special features designed to give boatbuilders a well-rounded menu of educational, technical and networking possibilities.

We wondered what effect the move to Louisville had on last year's attendees. Starting at the top, we asked Thom Dammrich, President of NMMA, to give us some background on why the show was moved.

"We wanted to find a place that would make people feel better," Dammrich said in a recent interview. "With the economy still in the slump, we understand that business must go on. Louisville offered us a great deal: less expensive across the board and centrally located—people could drive there and still save money." Thom went on to say that IBEX is the show where new products and new innovations shine. NMMA needed to find a way for more companies to connect. The best way to do that—move farther north.

Sure, Miami Beach is a great location but according to many company spokespeople we interviewed, it's just not conducive to getting much work done. Just what worked with the move and how did companies fare? We asked some long-time IBEX attendees as well as a few first-timers what they thought in hopes of finding out if indeed, NMMA's experiment is working.
To give us some perspective on the history of IBEX, we spoke with Chuck Gilchrest, Marine Sales Manager for Edson Marine. Chuck used to attend the industry convention back when it was still called the IMTECH, and was held in Chicago. In fact, Chuck was one of the original proponents of moving the venue down to Miami. He told MBJ that he felt as though IBEX lost its direction when it moved south. "IBEX needs to have better access to the Midwestern market in order to maintain integrity as an educational and wholesale direct-to-builder show. It's essential for its long-term success."

Chuck also told us that he hopes to see more builders at this year's show in Louisville "from a greater area than just the south." He'd also like to see MAATS, the Marine Accessories Aftermarket Trade Show, expanded. "This is the first place where these companies can be seen prior to all the fall boat shows," says Chuck. Another long-time IBEX-goer, Richard Schneider, President of API Marine, also used to attend the show back in Chicago. "Back then, boat builders had their own shows and dealers had their own shows," Richard told us. "It was a time when there really wasn't one show that focused just on the marine industry market. We went along out of loyalty for all those years, but when they switched to Louisville, it was like a shot of adrenaline! We loved Louisville because it cost us less overall, folks were helpful, and the sheer amount of good prospects exceeded anything we'd seen in years. Even with the down economy, we picked up some interesting customers and will return this year with the same optimism." It must have worked because Richard reported that API's sales are up about 30 percent this year.

In business since 1963, API—who manufactures private label engine parts—also sells to boatbuilders at the OEM level. "This year we'll be facing the MAATS pavilion so that we can be available to both," Richard said. He did have one contention, though, about the 2010 IBEX Show: 'Speed dating!' "Two years ago we were able to pay $75 for a 45-minute meeting with a potential customer. The 'dating sessions' were usually held just prior to the show start time. It was a phenomenal success—to give a one-on-one presentation." He's asked NMMA about whether they'll bring it back, but has yet to get a definitive answer. Richard hopes they have it again at this year's show.

Michael Stenberg, President of Dr. Shrink, Inc., had this to say: "Miami Beach is a fun place to recreate, but for a company like ours, located on the shores of Lake Michigan, we felt the show didn't have much of the Midwest represented. The move to Louisville was appreciated for a number of reasons but mainly because we were able to have booths both inside and out and demo our product. So we liked the location."
Jason Blackburn, VP of Sales & Marketing at Thomas G. Faria Corporation, logged in with this:

"Faria Corp has been coming to IBEX for 12 years. What did we like about Louisville? Lots! The centralized location and the lower costs associated with attending. Those come to mind first. But we also enjoyed the fact that more customers were able to attend by car. We're returning again this year and appreciate the timing of the show. It means that more builders will be there and because the show is in October, it gives us enough time to handle all the tooling needs as those builders decide to make changes. We believe in building long-term relationships with our customers and Louisville is a great city in which to foster those relationships."

Likewise, Jason Gardner, Co-owner of SeaDek Marine Products, responded:

"SeaDek attended the past six IBEX shows and felt that as the economy was looking so bleak, we considered not attending the 2010 show. Finally, we decided to go and were pleasantly surprised by what we found. The infusion of new people, especially those from the Midwest and Great Lakes made it totally worthwhile. We even saw pontoon boatbuilders! Everyone we spoke to seemed pleased with the show. If you ask me what made it a great experience, I'd have to say that primarily it was the lower costs. We had to travel farther than we did when the show was right in our state but it ended up costing less overall. We loved the location. Everything was close by, which allowed everyone to focus more on the business of the show. In Miami Beach it seemed that people got too caught up in the scene, like mixing work with pleasure. In Louisville, we could focus more on the business. That's essential right now.

"In fact, where we had to lay off most of our workers just to survive last year, we not only hired all of them back, but we're also adding some. We're serious about growth right now. We're not just in survival mode."

Nicole Murray, Co-Founder of Anchorsuit, a first-time vendor to IBEX 2010 had this to say:

"The Louisville show was our first time at IBEX since we're relatively new on the market. It was through our network on LinkedIn that we first found out about it. We decided to check it out though we were disappointed that it wasn't near any water! We did find it very well organized and really appreciated Joanne Miller, our account rep from NMMA. She arranged lots of introductions to manufacturers and distributors for us. We found all the people we met very friendly, right down to the servers in the local restaurants who knew all about the show. We're definitely returning this year and looking forward to increasing awareness of our products, meeting new distributors, retailers and marinas. If you have a trade show budget to spend this year, I would advise you to spend it at IBEX. I wish I'd done it sooner."

Euroglass Protective Products exhibited at IBEX 2010. Neil Lawson, President commented:

"I must admit I was skeptical about the success of the show due to the move from Miami to Louisville. I will be the first to admit I was 100 percent incorrect. IBEX 2010 was the best IBEX we have attended. The overall friendly atmosphere in Louisville was unexpected, especially when we were used to the Miami attitude. The attendance was the best we have seen as far as quality attendees and exhibitors. The show people were very friendly and helpful and best of all, the costs were half of that in Miami, from food to accommodations. Our sales were over 50 percent more than when we exhibited at Miami's IBEX. We at Euroglass are looking forward to IBEX 2011 in Louisville.

For those companies who make it back to IBEX, the show's producer, NMMA, hopes to set records that will include the most expansive seminar series ever. IBEX 2011 boasts more than 100 industry authorities who will conduct at least 91 different educational seminars, up 30 percent from last year's show. There will be something of interest for everyone from designers to dealers, boat yards to builders. And if that wasn't enough, the show will host more than 500 OEM and aftermarket exhibitors and will feature specialty pavilions, pre-conference sessions, free exhibitor workshops and other special events.

Marine Business Journal will be there to cover things so if you spot us, say hello and tell us how you're enjoying the show!

http://www.seadek.com/

http://www.marinebusinessjournal.com/

Look For SeaDek At MDCE Booth #832

2011-10-04T15:30:00.000-07:00

2011 Marine Dealer Conference & Expo

What it is: MDCE is where marine dealers gather to learn from the industry’s leading experts and explore the latest trends with marine manufacturers and service providers. Three different educational tracks will be offered, focusing on sales, marketing, service and management topics. The event takes place in an Orlando resort setting, offering many chances for networking and relaxation.

What will be covered: Expert tips, strategies and best practices for marine dealers. There will be special tracks devoted to sales, marketing, service and management.

Who should attend: Marine dealers seeking strategies to improve their profits and performance. The Powering Profits Track is designed for strategic decision makers such as general managers, department managers and dealer principals. The Service Track is designed for rising technicians, service advisors, service and parts managers. The Sales and Marketing Track has sessions for sales personnel, sales managers, general managers, marketing managers (including online managers) and dealer principals.

Registration includes:

Unlimited access to the session-packed conference

Unlimited access to the Expo Hall, with more than 100,000 square feet of exhibitor space

2 days of Marine Industry Certified education credits

Continental breakfasts, lunches and cocktail receptions on Tuesday & Wednesday

Rates:

Full conference pass: $449

Additional attendees from the same dealership: $429

**MRAA members save $50 off all registrations**

Social Registration for Spouses/Family Members: $199
(Includes cocktail receptions, but not education sessions)

2011 Marine Dealer Conference & Expo
November 6-9, 2011
Gaylord Palms Resort and Convention Center
Orlando, Florida

SeaDek For Helicopters? Sure!

2011-09-29T14:48:00.000-07:00

Next time you're being pursued by a sheriff's helicopter in Collier County, FL you can rest assured that the officers feet are firmly planted on custom SeaDek pads. Serve and protect baby!

Here's a little rescue action:

Sea Sharp Helm Pad

2011-09-29T14:40:00.000-07:00

Here is a nice looking custom SeaDek helm station pad with a Sea Sharp logo routed into it. Nothing like equal amounts of form and function. Great for sore legs and backs and looks good on the boat as well. http://www.seadek.com/

Custom SeaDek On A 2005 Crownline 240EX

2011-09-29T14:02:00.000-07:00

These are photos from a customers recent installation. See more models here: http://www.seadekstore.com/Crownline.aspx

SeaDek Installed On Nautiques

2011-09-23T17:56:00.000-07:00

SeaDek is a proud supplier of nonskid pads to Nautique Boats.

http://www.nautique.com/

SeaDek Swap Out On A Monterey 224 FS

2011-09-22T19:14:00.000-07:00

Just finished up restoring the pads on this this Monterey 224 FS that we used on a photo shoot last week. Interesting how different the two pad kits make the boat look. We used our two color, embossed material in the photo shoot and brown over black faux teak SeaDek for the reinstall.

Hydrotunes New SeaDek Reseller

2011-09-20T20:09:00.000-07:00

We're happy to announce the addition of Hydrotunes in Austin, Texas to the SeaDek dealer/reseller list. Be sure to check out there website, http://hydrotunes.com and keep an eye out for future Hydrotunes installation photos.

3217 Ranch Road 620 N.

Austin, TX 78734

512.771.9183 Trey

512.373.9456 Jacob

3rd Annual Hooked on Hope Inshore Fishing Tournament

2011-09-20T15:39:00.000-07:00

SeaDek is a proud supporter of the 3rd Annual Hooked on Hope Inshore Fishing Tournament

FISH and FIGHT Breast Cancer

REGISTER NOW!

The 3rd Annual Hooked on Hope Inshore Fishing Tournament is only 3 1/2 weeks away!!! Register now:

http://www.hookedonhope.org/Registration.aspx

Inshore Fishing Tournament

October 7th & 8th, 2011

Magnuson Hotel & Marina Cove

6800 Sunshine Skyway Lane

St. Petersburg, FL 337711

The tournament is an inshore fishing tournament (Snook, Trout & Redfish). The tournament kicks off with a reception party Friday, October 7th with a silent auction, dinner and live music! Then the tournament begins Saturday, October 8th and while the anglers are out on the water, we have a pamper party for breast cancer survivors/fighters! See you in 3 1/2 weeks!!

Breast Cancer Fighters/Survivors

Don't forget we have a special pamper party just for you! Ask your husband, boyfriend, friend, family member to sponsor you to recieve a day of beauty: yoga, make-up sessions, facials, mini-massages, patient education and support group information, gift bags and lunch!

Sponsor a Breast Cancer Survivor for only $100 donation to USF Breast Health.

Hooked on Hope
Box 110
Apollo Beach, Florida 33572

A Few Follow-up Shots From The Rainbow River

2011-09-19T09:25:00.000-07:00

Just finished up another great photo shoot with the help of Jordy, Arlene, Elle & Rossi Klien as well as the beautiful Kirsten. Please check out Jordy's website: www.jordy.com/ He does amazing photo and video work.

Special thanks to Monterey Boats, Mark Owens & Chris Murray for all of their help. The boat featured in this shoot is the impressive 224 FS. Tons of room, power and a huge extended swim platform that really shows of our SeaDek pads.

www.montereyboats.com/

SeaDek FaceBook Fan Page

2011-09-13T18:29:00.000-07:00

We can't accept any more friends on our SeaDek page, just hit 5k. You can "like us" on our fan page however and both pages will have updates and photos just like always. Thanks everyone for all of your support.

http://www.facebook.com/pages/SeaDek-Fan-Page/118036934899905

SeaDek Fan Page

Durable and shock absorbent, SeaDek provides not only an exceptional traction surface but also lessens the fatigue brought on from prolonged standing and working on hard decking and platforms. SeaDek also protects your deck from scratching, chipping and dents. Fishermen will appreciate SeaDek’s noise reducing qualities. SeaDek is manufactured in the United States from nonabsorbent, closed cell EV...See More

Page: ‎112 people like this

SeaDek Photo Shoot Featuring A Monterey 224 FS

2011-09-12T19:15:00.000-07:00

SeaDek Photo Shoot Featuring A Monterey 224 FS

2011-09-11T12:18:00.000-07:00

Just finished up another great photo shoot with the help of Jordy, Arlene, Elle & Rossi Klien as well as the beautiful Kirsten. Please check out Jordy's website: http://www.jordy.com/ He does amazing photo and video work.

http://www.montereyboats.com/

Crownline Boats - Featuring SeaDek Pads

2011-09-02T08:18:00.000-07:00

SeaDek is proud to be working with Crowline boats and to be featured on their new 215 SS, 235 SS and E Series boats. Please check out their full line at, http://www.crownline.com/2011/

SeaDek Custom Car Installation

2011-08-29T08:44:00.000-07:00

Yet another use for SeaDek customization. Michael Wood, one of our Cad designers here at SeaDek, just designed and installed a custom kit in the back hatch of his 2009 Volkswagen GTI. Turned out great and installed in no time at all. Nice work Mike!

Here is a link to a feature in juststance.com: http://www.juststance.com/exclusive/redemption/

Marine Dealer Conference & Expo 2011

2011-08-25T11:18:00.000-07:00

We are looking forward to the Marine Dealer Conference & Expo at the Gaylord Palms Resort & Convention Center in Orlando, FL from November 6-9, 2011.

More info at: http://www.boatingindustry.com/MDCE/index.cfm

Monterey Boats Engineering Pads

2011-08-25T10:48:00.000-07:00

Just getting these titanium faux teak test pads off to the Monterey Boats engineering facility today. SeaDek is an option on all 2011 and 2012 models. Check out their full line of boats at: http://www.montereyboats.com/

Beautiful SUPs From Contemporary Fiberglass

2011-08-24T10:49:00.000-07:00

Check out the new product that is now available at Contemporary Fiberglass. It is a hollow wood SUP. Scott uses strip redwood, basswood or cedar depending on the customers’ wishes. He can also add accents of tigerwood or other exotics.

Contemporary Fiberglass
10907 E. Marietta Ave. Suite 2
Spokane Valley, WA, 99206-6620
Call: (509) 995-6239
parrotheadinwa4@comcast.net
http://www.myswimplatform.com

Bryant 219 Custom Pad

2011-08-15T14:19:00.000-07:00

These photos are from a post on the Bryant Owners Forum: http://www.bryantboatowners.com/forum/viewtopic.php?p=51577&sid=db5e33e79d82c19fa6544eae78cc13a8

The Big Raft Off

2011-08-15T08:46:00.000-07:00

From our good friends up in Michigan. The event takes place annually on Lake St. Clair.

This photo from: http://www.aerialpics.com/

On the water

2011-08-11T07:31:00.001-07:00

GeoTagged, [N27.77772, E82.63020]

Nice Day For A Monterey

2011-08-11T07:29:00.001-07:00

GeoTagged, [N27.77802, E82.63012]

400 Sport Yacht

Monterey Boats Dealer Meeting

2011-08-10T10:04:00.001-07:00

Once again SeaDek is proud to be a part of the annual Monterey Boats Dealer Meeting. Monterey dealers from all over the world come together in Beautiful St. Petersburg, FL at the famous Vinoy Hotel.

GeoTagged, [N27.77863, E82.62947]

Monterey 234FSX

2011-08-08T07:42:00.000-07:00

Just got these photos in from a customer today. This is a beautiful custom kit for Monterey 234FSX.

Deck Pads for Stand-Up Paddleboards

2011-08-05T06:14:00.000-07:00

Deck Pads for Stand-Up Paddleboards

Kaholo SUP deck pads, CNC cut with rounded corners. Sold as a matching pair.

- Size: 38½” x 11½” x 5mm thick

- Storm Gray in color

- Super strong self-adhesive backing.

- Made by SeaDek

http://www.clcboats.com/shop/products/boat-building-supplies-epoxy-fiberglass-plywood/sup-deck-pads.html

SeaDek On Chesapeake Light Craft

2011-08-05T06:10:00.000-07:00

Nice write up in Chesapeake Light Craft recently.

We've been using this miraculous material as deck pads on Kaholo paddleboards. We've been really impressed with its functionality, durability, and good looks. Called SeaDek, it's nonskid padding that's marine-grade, UV-stable, self-adhesive, and can be cut on our CNC machine.

Applied to the bottom of a small boat, it vastly improves your traction AND it's got enough cushioning (5mm) to protect your knees. The light gray color looks pleasing in all kinds of boats.

You can order it custom-cut for all of CLC's smallcraft, or in sheet form to cut yourself. Just clean up your varnished or painted hull bottom, peel the backing off, and stick it down. Measure carefully---the adhesive is emphatically waterproof and will last for years and years.

For our boats, the flooring is computer-machined to fit the interiors perfectly. We include radii at all corners, and the patterns are carefully designed to fit around features like daggerboard trunks, mast steps, and other interior details. Flooring is in port and starboard halves, which looks good, adds traction (as the 3/4-inch wide gap down the middle channels away bilge water), and makes the material easier to peel-and-stick. Click "more images," above, for drawings of the flooring in each of our smallcraft designs.

We recommend marking the bottom panels with a pencil before installation to ensure proper alignment. The adhesive is watertight, VERY strong, and durable. If you need to refinish your interior in the future, you can mask off the nonskid flooring with tape.

Use the pull-down, above, to select each boat or sheet size.

Read the full article here: http://www.clcboats.com/shop/products/boat-building-supplies-epoxy-fiberglass-plywood/nonskid-flooring-for-smallcraft.html

Nice Bryant/SeaDek Install

2011-08-01T09:11:00.000-07:00

Happened across this on the Bryant forum this weekend. Looks good!

http://www.bryantboatowners.com/forum/viewtopic.php?p=51059&sid=12a78c010efc3e1116d529247c7aed2e

DIY Routed SeaDek Edges - Gheenoe LT25

2011-07-29T06:58:00.000-07:00

This is a project done by a member on www.customgheenoe.com. One of the best DIY jobs I've seen in a long time. He even included a diagram of the homemade router jig. The SeaDek material really is easy to work with if you take your time and cut carefully.

"SeaDek came out great with a home made jig and a router for straight edges and trim router for the curves. Ram pole mounts can be swung in or out or even to the back."

"I made this jig and used a formica / edge trimmer with the same bit for the hand edges around corners. May take more than one pass if you do not keep the foam blown or vacuumed out."

Sea Ray 440 Platform & Cockpit Install

2011-07-29T06:49:00.000-07:00

This job turned out really well. The customer originally wanted faux teak throughout but decided to go with our two color laminated and embossed material.

Sydney International Boat Show - Southern Cross Textiles

2011-07-29T06:12:00.000-07:00

Sydney International Boat Show

SeaDek's Australian distributor, Southern Cross Textiles, is displaying at this year's Sydney International Boat Show. Please stop in and visit them at booth #407.

Southern Cross Textiles is an Australia wide distributor of quality industrial grade textiles including tufted and nonwoven carpet, fibre, vinyl, PVC matting and woven acrylics for the marine, automotive, transport and furniture industries.

http://www.sctextiles.com.au

The 44th Sydney International Boat Show is being held at the Sydney Convention and Exhibition Centre & Cockle Bay Marina, Darling Harbour, Sydney, Australia

DATES: 28 July - 1 August, 2011 (Thursday – Monday)

HOURS: 10am - 8pm Halls, 10am - 6pm Marina

LOCATION: Sydney Convention and Exhibition Centre & Cockle Bay Marina,
Darling Harbour, Sydney, Australia

http://www.sydneyboatshow.com.au

SleekCraft Follow-up

2011-07-25T15:03:00.000-07:00

We posted some photos of this boat a while back but I just got some more in and thought I'd share them. This install just turned out great.

Beautiful Hewes With A Custom SeaDek Kit

2011-07-25T13:49:00.000-07:00

Material color: Beach Sand over Camel

Recent Contemporary Fiberglass Projects

2011-07-25T12:48:00.000-07:00

Just got these in from Scott over at Contemporary Fiberglass. Scott makes some great custom swim platforms.

For more information check out his website: http://www.myswimplatform.com/

Contemporary Fiberglass
10907 E. Marietta Ave., Suite 2, Spokane Valley, WA, 99206-6620
Email: parrotheadinwa4@comcast.net

Custom Swim Platform Pad - Cool Gray Over Moca

2011-07-25T11:40:00.000-07:00

Another interesting color combination for a recent customer's swim platform pad.

Sydney International Boat Show

2011-07-14T06:11:00.000-07:00

SeaDek'S Australian distributor, Southern Cross Textiles, will be displaying at this year's Sydney International Boat Show. Please stop in and visit them at booth #407.

Southern Cross Textiles is an Australia wide distributor of quality industrial grade textiles including tufted and nonwoven carpet, fibre, vinyl, PVC matting and woven acrylics for the marine, automotive, transport and furniture industries.

http://www.sctextiles.com.au

The 44th Sydney International Boat Show will be held at the Sydney Convention and Exhibition Centre & Cockle Bay Marina, Darling Harbour, Sydney, Australia

DATES: 28 July - 1 August, 2011 (Thursday – Monday)

HOURS: 10am - 8pm Halls, 10am - 6pm Marina

LOCATION: Sydney Convention and Exhibition Centre & Cockle Bay Marina,
Darling Harbour, Sydney, Australia

http://www.sydneyboatshow.com.au

Sharks in Boca Grande after tarpon

2011-07-13T08:33:00.000-07:00

Cool video from Captain Artie Price and his team. Putting their SeaDek to good use.

All that was left:

Congratulations To Artie Price And His Team

2011-07-12T09:05:00.000-07:00

Congratulations to Artie Price and his team on their 3rd consecutive Team of the Year title with the Professional Tarpon Tournament Series in Boca Grande. We did a custom full deck install and have been getting a ton of exposure. Thanks guys!

The shows air Sunday nights on SUN Network right now and then on WFN in the fall.

AddThis - The #1 Bookmarking & Sharing Service

2011-06-20T17:58:00.000-07:00

AddThis - The #1 Bookmarking & Sharing Service

Sarasota Slam

2011-06-20T14:40:00.000-07:00

SeaDek is a proud supporter of this years Sarasota Slam.

http://www.sarasotaslam.com

Life Is Good On A Chaparral 232

2011-06-15T12:37:00.000-07:00

Some customer photos from a recent Made To Order swim platform pad installed on a Chaparral 232. This color combination is storm gray over black. Our CNC machines rout down through the top layer of EVA material (storm gray) to expose the bottom color (midnight black) and create a rich contrasting logo and outer beveled edge.

SeaDek Is Hiring At Rockledge, FL Facility

2011-06-14T14:56:00.000-07:00

Need a summer Job? New career? Entry level positions available at the SeaDek factory in Rockledge, FL. No prior manufacturing experience required. No phone calls or stopping by without an appointment please. E-mail inquiries to sgardner@seadek.com

Centurion Install From WakeWorld.com Forum

2011-06-06T14:16:00.000-07:00

Just happened across this post today on WakeWorld.com. This customer was removing his old, hard, stamped rubber swim platform pad and replacing it with a comfortable and much nicer looking SeaDek faux teak pad made from soft yet durable closed-cell EVA material.

Marine Dealer Conference & Expo Promotion

2011-06-01T16:03:00.000-07:00

Look for SeaDek at this years Marine Dealer Conference & Expo.

http://www.boating-industry.com/MDCE/

SAVE $150!!

Through the month of June, dealership personnel who have never attended the Marine Dealer Conference & Expo can register for the event for the BEST PRICE EVER OFFERED. Just $299 will allow you to ...

• Learn from the industry's top experts and leading dealers with access to more than 20 educational sessions!

• Gain full access to the MDCE Expo Hall and nearly 100 industry suppliers!

• Enjoy three networking receptions, two breakfasts and two lunches with your peers!

• And experience the boating industry's fastest-growing trade show...

...all for $150 OFF of the normal registration rate.

Click HERE and use promo code FIRST1

* Please note, this offer is only available from June 1, 2011, through June 30, 2011. It applies only to dealership personnel who have never attended the Marine Dealer Conference & Expo. This is a non-refundable rate, and it may not be combined with any other offers.

Crowline Swim Platform Pad

2011-05-31T08:58:00.000-07:00

Interesting color combination on this Crownline swim platform pad.

Vantage with Custom SeaDek Faux Teak

2011-05-27T07:20:00.000-07:00

Vantage with Custom Flounder lights and 10" GPS from East Cape on Vimeo.

On this video we made, the customer picked out options for his Vantage like custom flounder lights, trolling motor, center console, sea-dek, and other custom upgrades. Check out the Vantage photo gallery for more pics!

SeaDek Australia

2011-05-25T10:08:00.000-07:00

Some photos just in from our Australian distributo, Southern Cross Textiles (http://sctextiles.com.au/) who just attended the Sanctuary Cove Boat Show. Be sure to look for them at the upcoming Sydney Show that runs from 28 July to 1st August.

Southern Cross Textiles Pty Ltd
28 Sunblest Cres Mount Druitt NSW 2770
Ph: 61 2 9832 0848
Fax: 61 2 9832 0843

SeaDek Samples Are Just A Click Away

2011-05-25T09:46:00.000-07:00

Click here to request SeaDek samples: http://www.seadek.com/Page_sample_request_pad.html

Sea Ray Before and After

2011-05-25T07:12:00.000-07:00

Don't know what's going on today but the photos keep coming in. Here are some before and after shots of a customers Sea Ray. Featuring Titanium Faux Teak. This pad has not been added to the store yet but you can call in to order it. Also, check out our other Sea Ray pads on our online store: http://www.seadekstore.com/searay.aspx

Photos from, http://clubsearay.com/showthread.php/42831-SeaDek

Another Happy SeaDek Customer

2011-05-25T06:57:00.000-07:00

Received this photo from a customer who just bought a Stingray from his local dealer. This pads looks great on his swim platform and feels even better. If you have a photo of your new pad installed please email it to us at promotions@seadek.com You'll be entered in our regular product giveaways.

Replace That Old Rubber Swim Platform Pad

2011-05-25T06:25:00.000-07:00

These old, hard stamped rubber pads were industry standard for years. Aside from not being very pretty they were murder on the knees, horrible on the butt and really did not provide much traction when wet. SeaDek is everything these pads are not.

Here are a few before and after shots from JAXONBoats LLC. We've recently started working with them and they are now repeat customers. Be sure to check them out at:

JAXONBoats LLC http://jaxonboats.com
Jack Walter - Owner
5088 Hillsdale Circle Suite B
El Dorado Hills, CA 95762
916-939-9555

Get a new platform pad for your boat today: http://www.seadek.com/Page_0_Swimplatforms.html

New Custom SeaDek Pads

2011-05-24T13:41:00.000-07:00

Lots of new Made To Order swim platform pads on their way to their new homes. Wouldn't one of these look good on your boat?

http://www.seadek.com/Page_0_Swimplatforms.html

Contemporary Fiberglass

2011-05-17T09:41:00.000-07:00

http://myswimplatform.com/

10907 E. Marietta Ave., Suite 2, Spokane Valley, WA, 99206-6620
Email: parrotheadinwa4@comcast.net

New Swim Platform Pads Being Added Daily

2011-05-17T09:18:00.000-07:00

SeaDek Online Store

SeaDek Transforms Your Transom

2011-05-16T07:18:00.001-07:00

Florida Sport Fishing Boat For Avid Angler

2011-05-16T07:16:00.000-07:00

Florida Sport Fishing Boat For Avid Angler

That's just cool

2011-05-12T09:48:00.000-07:00

Didn't get all the details on this job before it left the factory but that fish is pretty cool looking. Our CAD guys do good work.

Moomba Teak Swim Platform Pad

2011-05-12T09:31:00.000-07:00

Always something cool going on over at the Moomba forum. These guys have supported SeaDek from the very beginning and we always like to show off their boats when we get the chance. Here is a great looking one piece faux teak pad.

Moomba Forum
Moomba Swim Platform Pads by SeaDek

Linebreaker Helm Station Pad

2011-05-11T11:11:00.000-07:00

We've been adding new stock colors over the past few weeks and we're finally starting to see some custom pads coming off the machines with the new styles. Here is a custom helm station on it's way to it's new home.

Bimini blue over orange:

SeaDek Faux Teak Foam Material

2011-05-06T08:57:00.000-07:00

Soft, durable, beautiful, affordable and easy to install. What more could you ask for from a nonskid material for your swim platform or anywhere in your boat? We have many swim platforms already available on our webstore (http://www.seadekstore.com/swimplatformpads.aspx) and if we don't have a pad that fits your boat we can work with you to easily create one. Learn more at, www.seadek.com.

Faux teak samples:

Titanium (gray over black):

Brown over black:

Holly over teak:

Teak over holly:

SeaDek Pads aboard the 100% electric Ski Nautique

2011-05-06T06:40:00.000-07:00

In a follow up to last weeks release on the video featuring 100% electric Ski Nautique, here are a few photos of the SeaDek pads featured on the boat.

Learn more about this amazing boat at: http://nautique.com/videos/

Watch the video here: http://seadekblog.blogspot.com/2011/04/seadek-pads-featured-aboard-100_29.html

New SeaDek Colors

2011-05-06T06:01:00.000-07:00

Just adding some new colors this week. Also, the four faux teak variations are all now available in the drop down menus on the online store for our swim platform pads. Over the next 6-8 months we hope to have even more colors to offer. Check back in often as there is always something new happening at the SeaDek factory.

Here is the direct link to the swim platform pads on the store:

http://www.seadekstore.com/swimplatformpads.aspx

We manufacture the best nonskid pads in the industry and offer customization of everything in our catalog. Our pads are Made In The U.S.A. here at our factory central Florida. Learn even more about our product on our website, http://www.seadek.com

Babistry NonSkid Application

2011-05-03T08:05:00.000-07:00

I'm always amazed at the uses customers find for SeaDek. Victory Apostolic Church in Matteson, IL is using SeaDek for the bottom of their bapistry pool. Who'd a thunk it?

You can buy sheet material for you baistry on our online store: http://www.seadekstore.com/largesheets.aspx

SeaDek EZ Dock Pads

2011-05-02T07:36:00.000-07:00

Some dock pads on their wat to EZ Dock.

http://www.ez-dock.com

Ranger-SeaDek Install

2011-04-29T13:51:00.000-07:00

We work fast here at SeaDek. This video shows how easily a full kit can be installed.

Mobius LSV SeaDek Swim Platform Pad

2011-04-29T09:52:00.000-07:00

We do not recommend black as a top color and do not warranty this option for several reasons. That said some customers demand it and I gotta admit, it does look good.

More New Colors On The Way

2011-04-29T08:53:00.000-07:00

Getting ready to add some more new colors. Keep an eye out for a Bahama Blue and Electric Orange.

These are featured on the new Bote paddleboard pads. http://www.boteboard.com/

Before and After Malibu Platfrom from JaxonBoats

2011-04-29T06:02:00.000-07:00

Some before and after photos from Jaxon Boats LLC. The replaced the old hard stamped rubber pads on this boat and replaced them with a new SeaDek MSP1 with a hatch cutout. Really freshened up the swim platform.

Big improvement from these old pads,

Be sure to check them out at: http://jaxonboats.com/Wakeboard_Boat_Sales.html

This pad can be ordered directly from our online store:

http://www.seadekstore.com/malibu.aspx

SeaDek Pads featured aboard the 100% electric Ski Nautique

2011-04-29T05:32:00.000-07:00

Today Nautique announced the industry's first high performance 100% electric boat, the Ski Nautique E. To explore future propulsion technology, Nautique has partnered with LTS Marine, a Canadian company who specializes in electric motors. The boat features custom SeaDek pads in the cockpit and swimplatform.

SeaDek Marine NonSkid Test

2011-04-28T15:03:00.000-07:00

Four time World Champion Frieda Zamba demonstrates SeaDek's nonskid characteristics. These pads don't just look cool, they provide one of the best, foot friendly nonskid surfaces in the marine industry. SeaDek is trusted by some of the best boat builders and action sports stars in the world.

Check out our website, www.seadek.com and feel free to request samples to see for yourself just how grippy our closed-cell, thermoformed embossed foam really is.

Custom Ranger Install

2011-04-27T09:52:00.000-07:00

Just finished up this install this morning for professional fisherman Artie Price who fishes the Professional Tarpon Series (http://www.ptts.tv/) in Boca Grande. This Ranger 220 turned out great. Our CAD designer and SeaDek artist, Joe Norton, worked with Artie and his team to get the pads dialed in and logo artwork formatted properly. This install features 3mm storm gray over 3mm charcoal gray and is applied with our marine grade PSA backing for an easy peel and stick application. In addition to being an exceptional marine nonskid surface our closed-cell, nonabsorbent EVA foam feels like a pair of sandals under your feet. Spend one day on a boat with SeaDek and you'll never have a boat without it again.

Currently we do not do commercial installs here at the factory. We can work with you to create templates of your boat, create the pads and send them off to you to install at home. We can also refer you to custom installers in your area. Next year we will be looking to greatly expand our custom installation network. If you are a custom installer please feel free to contact us about how we can work with you and your custom install needs.

Aqua Camo SeaDek

2011-04-26T11:07:00.000-07:00

Going into summer we are looking to add several new color options to our current SeaDek pallet. Here are shots of one of our most popular new colors, Aqua Camo. These pads are on their way to Bote Paddleboards. There pads were designed by Tyler over at Castaway Customs.

Seadek Marine Products

Surf Expo 2012, Bote paddle board pads

Seadek & Castaway Customs in Nica with Surfari Charters

Hydrotunes

New Offices Going In At The SeaDek Factory

SeaDek On Your Treestand? Sure!

Applying a SeaDek Swim Platform Pad

SeaDek On A Chaparral 285 SSI

SeaDek Option On The New Sea Ray 210 SLX

First Boating Magazine Ad Of 2012

One of our employees put his SeaDek fish ruler to good use this holiday break!

Manitou Pontoon Boats

SeaDek Faux Teak - 2002 Regal 2860

Protector 33 - Military & Recreational Boats

Crownline Platform From Contemporary Fiberglass

WakeWorld.com Toys For Tots Fundraiser

2012 Reflex 20 Flats Boat

Engel Coolers Now Featuring SeaDek Top

Peel & Stick SeaDek Fish Ruler?

Wake World Pad For A Tige Z3

Monterey 264 FSX With SeaDek Faux Teak

Custom SeaDek Cobalt Swim Step Pad

2011 Marine Dealer Conference & Expo - SeaDek

RIB - Before & After SeaDek

SeaRay 380 Faux Teak Swim Platform Pad

Gambler - DIY - Before and After

Moomba Roo - SeaDek Swim Platform Pad

IBEX 2011 - Thank You From SeaDek

IBEX 2011 - SeaDek Booth 2639

Installing a new set of SeaDek swim platform pads

SeaDek In Marine Business Journal

Look For SeaDek At MDCE Booth #832

SeaDek For Helicopters? Sure!

Sea Sharp Helm Pad

Custom SeaDek On A 2005 Crownline 240EX

SeaDek Installed On Nautiques

SeaDek Swap Out On A Monterey 224 FS

Hydrotunes New SeaDek Reseller

3rd Annual Hooked on Hope Inshore Fishing Tournament

A Few Follow-up Shots From The Rainbow River

SeaDek FaceBook Fan Page

We can't accept any more friends on our SeaDek page, just hit 5k. You can "like us" on our fan page however and both pages will have updates and photos just like always. Thanks everyone for all of your support.http://www.facebook.com/pages/SeaDek-Fan-Page/118036934899905

SeaDek Photo Shoot Featuring A Monterey 224 FS

SeaDek Photo Shoot Featuring A Monterey 224 FS

Crownline Boats - Featuring SeaDek Pads

SeaDek Custom Car Installation

Marine Dealer Conference & Expo 2011

Monterey Boats Engineering Pads

Beautiful SUPs From Contemporary Fiberglass

Bryant 219 Custom Pad

The Big Raft Off

On the water

Nice Day For A Monterey

Monterey Boats Dealer Meeting

Monterey 234FSX

Deck Pads for Stand-Up Paddleboards

Deck Pads for Stand-Up Paddleboards

SeaDek On Chesapeake Light Craft

Nice Bryant/SeaDek Install

DIY Routed SeaDek Edges - Gheenoe LT25

Sea Ray 440 Platform & Cockpit Install

Sydney International Boat Show - Southern Cross Textiles

Sydney International Boat Show

SleekCraft Follow-up

Beautiful Hewes With A Custom SeaDek Kit

Recent Contemporary Fiberglass Projects

Custom Swim Platform Pad - Cool Gray Over Moca

Sydney International Boat Show

Sharks in Boca Grande after tarpon

Congratulations To Artie Price And His Team

AddThis - The #1 Bookmarking & Sharing Service

Sarasota Slam

Life Is Good On A Chaparral 232

SeaDek Is Hiring At Rockledge, FL Facility

Centurion Install From WakeWorld.com Forum

Marine Dealer Conference & Expo Promotion

Crowline Swim Platform Pad

Vantage with Custom SeaDek Faux Teak

SeaDek Australia

SeaDek Samples Are Just A Click Away

We can't accept any more friends on our SeaDek page, just hit 5k. You can "like us" on our fan page however and both pages will have updates and photos just like always. Thanks everyone for all of your support.

http://www.facebook.com/pages/SeaDek-Fan-Page/118036934899905